Our Products

Listed below are our out-of-the-box hardware products:

Cyclone_V_SoC

Real-time applications can be realised with the control unit, e.g. for:

  • Control systems with sampling periods < 1 ms
  • Measured value acquisition with complex signal processing
  • Communication applications / Internet of the Things (IoT)
  • Medical technologies/bioinformatics
  • Safety applications

Thanks to the two Ethernet interfaces, the controller can be integrated into a larger network and set up its own network.
Additional interfaces, e.g. to analogue-digital converters (ADC and DAC), are connected via the plug connectors on the underside.

The controller unit has the following features:

  • Cyclone V SoC 5CSEMA6U23*
  • 1 GByte DDR3-ECC-SDRAM
  • SD Card slot
  • 2x GBit Ethernet
  • QSPI-Flash 128 MByte
  • USB
  • USB2UART
  • Power supply 3,3V
  • > 50 User IOs available on the connector
  • Size 130 mm x 100 mm

The scope of delivery includes:

  • Control unit / SoC Board
  • Reference design for software and hardware
  • Bootable SD card with Linux

For information about the control unit, please contact us. We are also happy to develop the appropriate FPGA design and software for the controller.

*To develop your own FPGA designs, you also need the Altera development environment Quartus The Cyclone V5 5CSEMA6U23 FPGA is supported by the free WebEdition.

abaxor_SPU_Baseboard

Real-time applications can be realised with the control unit, e.g. for:

  • Control systems
  • Medical technic/Bioinformatics
  • Development platform

The control unit can be easily integrated into other hardware using 2 TE board-to-board connectors.
The IOs are easily accessible thanks to the 2.54 mm standard connectors.


The controller unit has the following properties:

  • Cyclone V 5CEBA2U15*
  • Altera FPGA configuration Flash
  • Power supply selectable via jumper 2.5V/3.3V
  • 36 user's IOs available on the connector
  • 2x TE connectivity 5179029/30/31-1-board-to-board connector
  • Size 58 mm x 38 mm

The scope of delivery of the SPU includes:

  • abaxor SPU
  • Test design for SPU

The baseboard is supplied with:

  • abaxor Baseboard

The abaxor SPU and the baseboard can also be purchased separately.

For enquiries about the SPU, please do not hesitate to contact us. We are also happy to develop the right FPGA design for you.

*To develop your own FPGA designs, you also need the Altera development environment Quartus. The Cyclone V 5CEBA2U15 FPGA is supported by the free WebEdition.

abaxor_spartan_6_modul

Real-time applications can be realised with the control unit, e.g. for:

  • Image processing
  • Medical technic/Bioinformatics
  • Development platform

The control unit can be easily integrated into other hardware using 2 TE board-to-board connectors and only one required supply voltage.

The module has the following properties:

  • Spartan 6 XC6SLX75* on request, the module can also be equipped with larger FPGAs
  • SPI configuration flash
  • 2x 128 MiB DDR3-SDRAM
  • 100 Mbit/s Ethernet Phy
  • > 170 user IOs available on the connector on the underside
  • Size 72 mm x 75 mm
  • 3.3 V power supply

For enquiries about the Spartan 6 module, please do not hesitate to contact us. We will also be happy to develop a suitable FPGA design for you.

*To develop your own FPGA designs, you also need the Xilinx development environment ISE. The XC6SLX75 FPGA is supported by the free WebEdition.